TQ2SA relais for RF switching

I tried a cheap TQ2SA SMD relais for RF switching. The circuit was using the 2 switches as one SPDT switch with the unused output connected to ground.
Find some pictures attached. For low power it should be possible to use the relais up to 70cm (ok, 30dB isolation only). On 2m and below it works with good results…

relais side

relais side

connector side

connector side

TQ2SA-5V_SPDT_insertion_loss

TQ2SA-5V_SPDT_insertion_loss

TQ2SA-5V_SPDT_short_crosscoupling

TQ2SA-5V_SPDT_short_crosscoupling