Just trying a bit with my HiQSDR frontend and Quisk together with SO2SDR.
Jim implemented Rigctrl model 2 to Quisk. This makes it operate with other software like fldigi very well.
SO2SDR is a contest log with SDR bandmap and DXCluster. Worked QSO can be marked in the bandmap as well as stations spotted in the cluster.
Unfortunately I do not get IQ signals from Quisk to SO2SDR yet…
See a screenshot:
Quisk and SO2SDR
I had the chance to run the MMC 2012 from the QTH of DL4DTU in JO60TR. Special thanks to Norbert !
The antenna was a 8ele and about 400wtts with Norberts TS850 + Transverter.
Since i had no equipment to carry despite a PC for logging and calling i decided to give some monitoring with a SDR solution a try. I used my 20Euro Noxon DAB Stick with SDR# to observe the frequency occupation. Surprisingly this simple device did a fairly good job. Unfortunately i was not able to get my CwSkimmer working again although it worked fine before at home. Because of the high density of stations i faced strong QRM. In the end i had about 230 QSO with about 60k points. Thats a fair result for my first MMC and a single antenna system ;)
The short video shows the PA of Norbert, the USB stick for internet connection, the logging PC, the SDR PC with the Noxon stick and (most important ;) ) the heater.
Band during MMC12 in JO60TR