QRV from JO60LK on 23cm. The picture shows the setup. The HiQSDR was connected to the 23cm to 29MHz transverter. The Quisk software runs on my i7 notebook. On the same machine i ran Airscout and a client for the ON4KST chat. The notebook below runs the VUSC log under Linux in Wine. The log features a CW keyer which connects to the transceiver via the interface box in the middle. The rotator control at the left side can be controlled from VUSC as well and direct the antenna towards the locator entered.
The output power was 2x100W with 1.5m dish and Quados 8.
PI4Z – 648km
PA6NL – 639km